Choose your model
1st Gen Nissan Xterra Rear Bumper Kit
Nissan Xterra
Nissan Nissan Xterra CO0787Product ID: 1553
Create an account to put this in your wishlist.
Go to wishlistCreate an account to put this in your wishlist.
1st Gen Nissan Xterra Rear Bumper Kit
Nissan Xterra
Nissan Nissan Xterra CO0787Product ID: 1553
Ships within 3-10 business days with 2 day shipping
Ships within 3-10 business days with 2 day shipping
Choose
your variation
4.6
( 215 Google reviews)
This is a high clearance weld-together rear bumper kit for the 1st generation (1998-2004) Nissan Xterra. It features a bolt-on design, recessed 2" hitch receiver, integrated LED pod light mounts (not shown) and heavy duty recovery points that tie directly into the main frame mounts. It provides excellent protection for the rear of your Xterra and the high clearance design hugs the rear of the vehicle for added ground clearance and departure angle. The low-profile design of this bumper keeps the weight very reasonable, meaning that you can run it with the factory suspension without any noticeable sag or change in performance. However, don't let the slim profile fool you! This bumper has been designed with hard offroad driving in mind and can take a serious beating without skipping a beat.
Compared to a stock bumper with hitch receiver, this bumper significantly increases ground clearance and departure angle by moving the hitch receiver up into the bumper shell and then recessing it for a smooth surface that will easily slide over trail obstacles and steep ditch crossings. This substantially increases the offroad capability of your Xterra. It offers excellent protection from rocks, trees and animal strikes and has been kept to a weight of 65lbs through careful design work. This is especially noteworthy when you consider the fact that the factory hitch receiver, frame crossmember and rear bumper all get removed before installing the Coastal Offroad bumper. This means that even with our steel bumper version, the total weight increase to your vehicle will be negligible at best. This minimizes added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired.
This bumper kit comes with integrated light buckets sized for surface mount LED pod lights (not shown). These buckets neatly house the lights behind the face of the bumper, protecting the lights and avoiding the unsightly plastic mounting flanges found on typical flush mount lights. In addition, the slotted mounting tabs allow you to adjust the angle of the lights up and down and side to side to optimize the spread of the light beam.
The swing out tire carrier is built to accept a spare tire up to 37" in diameter. The carrier also includes mounting brackets for a license plate, the factory license plate lights, a hilift jack and other recovery items. The carrier features heavy duty chromoly heim joint hinges, locking 2000lb toggle latch, T-handle spring pin, and a replaceable UHMW catch pad that provides secure, rattle free operation. The heim joints in conjunction with the toggle latch provide tons of adjustability, allowing for easy assembly and guaranteed alignment of the carrier latch. The single swing out add-on weighs 34lbs to the total bumper weight.
DIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included)
Laser cut parts are slotted and tabbed for foolproof fitment. This greatly reduces the amount of assembly, welding, grinding time required by you and makes for a cleaner finished product. The Nitrogen laser cutting technology means no cutting edge oxidation or slag and thus easier and stronger welds
Slim profile is engineered to provide maximum ground clearance and complement the factory body lines
Heavy duty 3/16" plate steel construction for maximum offroad strength and durability
Optional 1/4" 5052 aluminum construction for a lightweight yet very durable overlanding setup (38lb weight savings)
Integrated light buckets provide protected mounting locations for LED pod lights to give additional reverse lighting (not shown)
Included 2" hitch receiver is recessed for a clean look and further clearance gains (While the hitch is very well reinforced, we cannot rate it for on-road towing due to the DIY welding nature of this kit)
Mounts directly to frame using 12 factory mounting points - no drilling required.
Reinforced 9/16" thick clevis mounts allow the use of 3/4" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles
Optional Swing out tire carrier with license plate mount and hilift jack/recovery gear brackets
Integrated cutout for factory hitch plug. This gets the hitch plug up and into the bumper for great protection offroad.
1st Gen Nissan Xterra Rear Bumper Kit
Nissan Xterra 1998-2004
CAD$ 530.68Product ID: 1553
1st Gen Xterra High Clearance Front Bumper Kit
CAD$ 785.14
Product overview
This is a high clearance weld-together rear bumper kit for the 1st generation (1998-2004) Nissan Xterra. It features a bolt-on design, recessed 2" hitch receiver, integrated LED pod light mounts (not shown) and heavy duty recovery points that tie directly into the main frame mounts. It provides excellent protection for the rear of your Xterra and the high clearance design hugs the rear of the vehicle for added ground clearance and departure angle. The low-profile design of this bumper keeps the weight very reasonable, meaning that you can run it with the factory suspension without any noticeable sag or change in performance. However, don't let the slim profile fool you! This bumper has been designed with hard offroad driving in mind and can take a serious beating without skipping a beat.
Compared to a stock bumper with hitch receiver, this bumper significantly increases ground clearance and departure angle by moving the hitch receiver up into the bumper shell and then recessing it for a smooth surface that will easily slide over trail obstacles and steep ditch crossings. This substantially increases the offroad capability of your Xterra. It offers excellent protection from rocks, trees and animal strikes and has been kept to a weight of 65lbs through careful design work. This is especially noteworthy when you consider the fact that the factory hitch receiver, frame crossmember and rear bumper all get removed before installing the Coastal Offroad bumper. This means that even with our steel bumper version, the total weight increase to your vehicle will be negligible at best. This minimizes added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired.
This bumper kit comes with integrated light buckets sized for surface mount LED pod lights (not shown). These buckets neatly house the lights behind the face of the bumper, protecting the lights and avoiding the unsightly plastic mounting flanges found on typical flush mount lights. In addition, the slotted mounting tabs allow you to adjust the angle of the lights up and down and side to side to optimize the spread of the light beam.
The swing out tire carrier is built to accept a spare tire up to 37" in diameter. The carrier also includes mounting brackets for a license plate, the factory license plate lights, a hilift jack and other recovery items. The carrier features heavy duty chromoly heim joint hinges, locking 2000lb toggle latch, T-handle spring pin, and a replaceable UHMW catch pad that provides secure, rattle free operation. The heim joints in conjunction with the toggle latch provide tons of adjustability, allowing for easy assembly and guaranteed alignment of the carrier latch. The single swing out add-on weighs 34lbs to the total bumper weight.
DIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included)
Laser cut parts are slotted and tabbed for foolproof fitment. This greatly reduces the amount of assembly, welding, grinding time required by you and makes for a cleaner finished product. The Nitrogen laser cutting technology means no cutting edge oxidation or slag and thus easier and stronger welds
Slim profile is engineered to provide maximum ground clearance and complement the factory body lines
Heavy duty 3/16" plate steel construction for maximum offroad strength and durability
Optional 1/4" 5052 aluminum construction for a lightweight yet very durable overlanding setup (38lb weight savings)
Integrated light buckets provide protected mounting locations for LED pod lights to give additional reverse lighting (not shown)
Included 2" hitch receiver is recessed for a clean look and further clearance gains (While the hitch is very well reinforced, we cannot rate it for on-road towing due to the DIY welding nature of this kit)
Mounts directly to frame using 12 factory mounting points - no drilling required.
Reinforced 9/16" thick clevis mounts allow the use of 3/4" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles
Optional Swing out tire carrier with license plate mount and hilift jack/recovery gear brackets
Integrated cutout for factory hitch plug. This gets the hitch plug up and into the bumper for great protection offroad.
Key specifications
This is a high clearance weld-together rear bumper kit for the 1st generation (1998-2004) Nissan Xterra. It features a bolt-on design, recessed 2" hitch receiver, integrated LED pod light mounts (not shown) and heavy duty recovery points that tie directly into the main frame mounts. It provides excellent protection for the rear of your Xterra and the high clearance design hugs the rear of the vehicle for added ground clearance and departure angle. The low-profile design of this bumper keeps the weight very reasonable, meaning that you can run it with the factory suspension without any noticeable sag or change in performance. However, don't let the slim profile fool you! This bumper has been designed with hard offroad driving in mind and can take a serious beating without skipping a beat.
Compared to a stock bumper with hitch receiver, this bumper significantly increases ground clearance and departure angle by moving the hitch receiver up into the bumper shell and then recessing it for a smooth surface that will easily slide over trail obstacles and steep ditch crossings. This substantially increases the offroad capability of your Xterra. It offers excellent protection from rocks, trees and animal strikes and has been kept to a weight of 65lbs through careful design work. This is especially noteworthy when you consider the fact that the factory hitch receiver, frame crossmember and rear bumper all get removed before installing the Coastal Offroad bumper. This means that even with our steel bumper version, the total weight increase to your vehicle will be negligible at best. This minimizes added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired.
This bumper kit comes with integrated light buckets sized for surface mount LED pod lights (not shown). These buckets neatly house the lights behind the face of the bumper, protecting the lights and avoiding the unsightly plastic mounting flanges found on typical flush mount lights. In addition, the slotted mounting tabs allow you to adjust the angle of the lights up and down and side to side to optimize the spread of the light beam.
The swing out tire carrier is built to accept a spare tire up to 37" in diameter. The carrier also includes mounting brackets for a license plate, the factory license plate lights, a hilift jack and other recovery items. The carrier features heavy duty chromoly heim joint hinges, locking 2000lb toggle latch, T-handle spring pin, and a replaceable UHMW catch pad that provides secure, rattle free operation. The heim joints in conjunction with the toggle latch provide tons of adjustability, allowing for easy assembly and guaranteed alignment of the carrier latch. The single swing out add-on weighs 34lbs to the total bumper weight.
DIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included)
Laser cut parts are slotted and tabbed for foolproof fitment. This greatly reduces the amount of assembly, welding, grinding time required by you and makes for a cleaner finished product. The Nitrogen laser cutting technology means no cutting edge oxidation or slag and thus easier and stronger welds
Slim profile is engineered to provide maximum ground clearance and complement the factory body lines
Heavy duty 3/16" plate steel construction for maximum offroad strength and durability
Optional 1/4" 5052 aluminum construction for a lightweight yet very durable overlanding setup (38lb weight savings)
Integrated light buckets provide protected mounting locations for LED pod lights to give additional reverse lighting (not shown)
Included 2" hitch receiver is recessed for a clean look and further clearance gains (While the hitch is very well reinforced, we cannot rate it for on-road towing due to the DIY welding nature of this kit)
Mounts directly to frame using 12 factory mounting points - no drilling required.
Reinforced 9/16" thick clevis mounts allow the use of 3/4" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles
Optional Swing out tire carrier with license plate mount and hilift jack/recovery gear brackets
Integrated cutout for factory hitch plug. This gets the hitch plug up and into the bumper for great protection offroad.
Key specifications
-
David Beaudet
-
Phillip Miller (ZomBud)
-
Gerry B
-
Eric T