Choose your model
2nd Gen Chevrolet Tracker Low Profile Rear Bumper Kit
Chevrolet Tracker
Chevrolet Chevrolet Tracker CO9073Product ID: 1587
Create an account to put this in your wishlist.
Go to wishlistCreate an account to put this in your wishlist.
2nd Gen Chevrolet Tracker Low Profile Rear Bumper Kit
Chevrolet Tracker
Chevrolet Chevrolet Tracker CO9073Product ID: 1587
Ships within 3-10 business days with 2 day shipping
Ships within 3-10 business days with 2 day shipping
Choose
your variation
4.6
( 215 Google reviews)
This is a high clearance DIY weld-together rear bumper kit for the 1999-2005 Chevrolet Tracker. This bumper starts by mounting directly to the frame of your Tracker using a total of 8 mounting points. While this is certainly overkill, it ensures that impact and pulling forces are evenly distributed over a large section of your Tracker's frame. This translates into excellent protection from trail obstacles, trees and distracted drivers. While this bumper kit is available with our single and dual swing out options, we still wanted to maintain full usability of the door-mounted factory tire carrier. For this reason, the bumper is notched out in this location, giving you the ability to mount a tire up to 32" on the factory carrier (a tire larger than this is not recommended anyways due to limitations of the factory rear door and door hinges!). To take it one step further, we also incorporated a convenient stepping platform into the notch to provide easy access to your roof mounted accessories.
The profile of this bumper has been designed with maximum ground clearance and departure angles put first. The bumper sits as high and tight to the rear of the Tracker as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the rear wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that many Tracker owners want to run oversized tires along with long arm suspension kits that extend the wheelbase of the vehicle. This moves the rear tires further rearwards and often creates interference issues with the stock bumper. We have thought ahead and specifically designed these bumper side wings to clear 33" tires with a long arm suspension kit.
We finished this bumper off with integrated light buckets for flush mount LED pod lights (custom light cut outs available by request), an integrated hitch receiver, and heavy duty 9/16" recovery points that are placed directly in line with the Tracker frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and bolt directly to the Tracker frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Tracker's frame and are essentially indestructible! What could make this bumper even better? The low profile design has resulted in very reasonable weights of 81lbs for the steel bumper and 40lbs for the aluminum version. Considering that this bumper replaces your factory hitch receiver, plastic bumper cover, and steel inner-bumper bar, the resulting weight increase to your Tracker is minimal.
The swing out carriers come in either a single or dual sided configuration and are built to accept a tire up to 37" in diameter. Both carriers include mounting brackets for a hilift jack and other recovery items. The dual swing out includes the hilift mount as well as a lockable jerry can holder designed to fit two 20L NATO style jerry cans. These carriers feature heavy duty chromoly heim joint hinges, locking 2000lb toggle latches, T-handle spring pins, and a replaceable UHMW catch pad that provides secure, rattle free operation. The heim joints in conjunction with the toggle latch provide tons of adjustability, allowing for easy assembly and guaranteed alignment of the carrier latch. The single swing out add-on weighs 34lbs and the dual swing out add-on with gas can holder weighs 77lbs.
DIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included)
Slim profile is engineered to provide maximum ground clearance and complement the factory body lines
Heavy duty 3/16" plate steel construction for maximum offroad strength and durability
Optional 1/4" 5052 aluminum construction for a lightweight yet very durable overlanding setup (41lb weight savings)
Optional 2" hitch receiver is integrated and inset into the bumper shell for a clean look and further clearance gains (While the hitch is very well reinforced, we cannot rate it for on-road towing due to the DIY welding nature of this kit)
Mounts directly to frame using 8 factory mounting points to evenly distribute impact and pulling forces
Reinforced 9/16" thick clevis mounts allow the use of 3/4" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles
All kits ship as clean, bare metal that is ready to weld out of the box - the Nitrogen laser cutting technology means no cutting edge oxidation and thus easier and stronger welds
Optional Single and Dual Swing out carriers with spare tire mount, hilift jack mount and locking dual NATO can holder (dual swing out only)
2nd Gen Chevrolet Tracker Low Profile Rear Bumper Kit
Chevrolet Tracker 1999-2005
CAD$ 745.02Product ID: 1587
2nd Gen Chevrolet Tracker High Clearance Front Bumper Kit
CAD$ 747.31
Product overview
This is a high clearance DIY weld-together rear bumper kit for the 1999-2005 Chevrolet Tracker. This bumper starts by mounting directly to the frame of your Tracker using a total of 8 mounting points. While this is certainly overkill, it ensures that impact and pulling forces are evenly distributed over a large section of your Tracker's frame. This translates into excellent protection from trail obstacles, trees and distracted drivers. While this bumper kit is available with our single and dual swing out options, we still wanted to maintain full usability of the door-mounted factory tire carrier. For this reason, the bumper is notched out in this location, giving you the ability to mount a tire up to 32" on the factory carrier (a tire larger than this is not recommended anyways due to limitations of the factory rear door and door hinges!). To take it one step further, we also incorporated a convenient stepping platform into the notch to provide easy access to your roof mounted accessories.
The profile of this bumper has been designed with maximum ground clearance and departure angles put first. The bumper sits as high and tight to the rear of the Tracker as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the rear wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that many Tracker owners want to run oversized tires along with long arm suspension kits that extend the wheelbase of the vehicle. This moves the rear tires further rearwards and often creates interference issues with the stock bumper. We have thought ahead and specifically designed these bumper side wings to clear 33" tires with a long arm suspension kit.
We finished this bumper off with integrated light buckets for flush mount LED pod lights (custom light cut outs available by request), an integrated hitch receiver, and heavy duty 9/16" recovery points that are placed directly in line with the Tracker frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and bolt directly to the Tracker frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Tracker's frame and are essentially indestructible! What could make this bumper even better? The low profile design has resulted in very reasonable weights of 81lbs for the steel bumper and 40lbs for the aluminum version. Considering that this bumper replaces your factory hitch receiver, plastic bumper cover, and steel inner-bumper bar, the resulting weight increase to your Tracker is minimal.
The swing out carriers come in either a single or dual sided configuration and are built to accept a tire up to 37" in diameter. Both carriers include mounting brackets for a hilift jack and other recovery items. The dual swing out includes the hilift mount as well as a lockable jerry can holder designed to fit two 20L NATO style jerry cans. These carriers feature heavy duty chromoly heim joint hinges, locking 2000lb toggle latches, T-handle spring pins, and a replaceable UHMW catch pad that provides secure, rattle free operation. The heim joints in conjunction with the toggle latch provide tons of adjustability, allowing for easy assembly and guaranteed alignment of the carrier latch. The single swing out add-on weighs 34lbs and the dual swing out add-on with gas can holder weighs 77lbs.
DIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included)
Slim profile is engineered to provide maximum ground clearance and complement the factory body lines
Heavy duty 3/16" plate steel construction for maximum offroad strength and durability
Optional 1/4" 5052 aluminum construction for a lightweight yet very durable overlanding setup (41lb weight savings)
Optional 2" hitch receiver is integrated and inset into the bumper shell for a clean look and further clearance gains (While the hitch is very well reinforced, we cannot rate it for on-road towing due to the DIY welding nature of this kit)
Mounts directly to frame using 8 factory mounting points to evenly distribute impact and pulling forces
Reinforced 9/16" thick clevis mounts allow the use of 3/4" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles
All kits ship as clean, bare metal that is ready to weld out of the box - the Nitrogen laser cutting technology means no cutting edge oxidation and thus easier and stronger welds
Optional Single and Dual Swing out carriers with spare tire mount, hilift jack mount and locking dual NATO can holder (dual swing out only)
Key specifications
This is a high clearance DIY weld-together rear bumper kit for the 1999-2005 Chevrolet Tracker. This bumper starts by mounting directly to the frame of your Tracker using a total of 8 mounting points. While this is certainly overkill, it ensures that impact and pulling forces are evenly distributed over a large section of your Tracker's frame. This translates into excellent protection from trail obstacles, trees and distracted drivers. While this bumper kit is available with our single and dual swing out options, we still wanted to maintain full usability of the door-mounted factory tire carrier. For this reason, the bumper is notched out in this location, giving you the ability to mount a tire up to 32" on the factory carrier (a tire larger than this is not recommended anyways due to limitations of the factory rear door and door hinges!). To take it one step further, we also incorporated a convenient stepping platform into the notch to provide easy access to your roof mounted accessories.
The profile of this bumper has been designed with maximum ground clearance and departure angles put first. The bumper sits as high and tight to the rear of the Tracker as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the rear wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that many Tracker owners want to run oversized tires along with long arm suspension kits that extend the wheelbase of the vehicle. This moves the rear tires further rearwards and often creates interference issues with the stock bumper. We have thought ahead and specifically designed these bumper side wings to clear 33" tires with a long arm suspension kit.
We finished this bumper off with integrated light buckets for flush mount LED pod lights (custom light cut outs available by request), an integrated hitch receiver, and heavy duty 9/16" recovery points that are placed directly in line with the Tracker frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and bolt directly to the Tracker frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Tracker's frame and are essentially indestructible! What could make this bumper even better? The low profile design has resulted in very reasonable weights of 81lbs for the steel bumper and 40lbs for the aluminum version. Considering that this bumper replaces your factory hitch receiver, plastic bumper cover, and steel inner-bumper bar, the resulting weight increase to your Tracker is minimal.
The swing out carriers come in either a single or dual sided configuration and are built to accept a tire up to 37" in diameter. Both carriers include mounting brackets for a hilift jack and other recovery items. The dual swing out includes the hilift mount as well as a lockable jerry can holder designed to fit two 20L NATO style jerry cans. These carriers feature heavy duty chromoly heim joint hinges, locking 2000lb toggle latches, T-handle spring pins, and a replaceable UHMW catch pad that provides secure, rattle free operation. The heim joints in conjunction with the toggle latch provide tons of adjustability, allowing for easy assembly and guaranteed alignment of the carrier latch. The single swing out add-on weighs 34lbs and the dual swing out add-on with gas can holder weighs 77lbs.
DIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included)
Slim profile is engineered to provide maximum ground clearance and complement the factory body lines
Heavy duty 3/16" plate steel construction for maximum offroad strength and durability
Optional 1/4" 5052 aluminum construction for a lightweight yet very durable overlanding setup (41lb weight savings)
Optional 2" hitch receiver is integrated and inset into the bumper shell for a clean look and further clearance gains (While the hitch is very well reinforced, we cannot rate it for on-road towing due to the DIY welding nature of this kit)
Mounts directly to frame using 8 factory mounting points to evenly distribute impact and pulling forces
Reinforced 9/16" thick clevis mounts allow the use of 3/4" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles
All kits ship as clean, bare metal that is ready to weld out of the box - the Nitrogen laser cutting technology means no cutting edge oxidation and thus easier and stronger welds
Optional Single and Dual Swing out carriers with spare tire mount, hilift jack mount and locking dual NATO can holder (dual swing out only)
Key specifications
-
David Beaudet
-
Phillip Miller (ZomBud)
-
Gerry B
-
Eric T